You need to install Wireshark in order to see packets. One is to connect the host machine with internet, and the other to allow other devices to connect with that host machine. Once everything is connected, you should be able to see two (or more) network interfaces in your host machine. Then choose your Android device to connect to that WiFi hotspot from WiFi settings. Steps to follow on creating a WiFi hotspot varies drastically depending on the host device’s hardware, OS, etc. That connectivity is shared using a WiFi hostspot. Your machine connects to internet using an Ethernet cable (this can again be a WiFi network). This can be achieved by creating a WiFi hotspot in your machine (host machine). Device must be able to connect to the internet through your machine’s WiFi network.In Burp Suite, you can see, as well as you can change the request content so that outgoing request is altered from the original at a middle layer of the network path. The difference is, in Wireshark, you can see traffic in both directions. Burp Suite - Community edition is sufficient.Among them, you can use one of the below, which will be discussed here: There are multiple tools to sniff packets. However, steps to follow on a Windows system will not be much different. Here, you can find a step by step guide on intercepting HTTP traffic for Android mobile devices and emulated devices with host machine as Linux. Specially, when the application is not something under your control, and if still you want to see HTTP requests, you will have to use a proxy to see the traffic. For newbies of mobile application development and testing, it is a little difficult task to see HTTP requests going out and coming in from/to the device.

Wireshark https requests